栾川钼矿复杂地层钻进跟管钻具研制
Development of Casing Drilling Bit in Complicated Stratum of Molybdenum Minerals in Luanchuan

作者: 刘 军 :洛阳栾川钼业集团股份有限公司;

关键词: 复杂地层跟管钻进钻具结构优化Complicated Stratum With Pipe Drilling Drilling Tools Structural Optimization

摘要:
栾川钼矿地层是典型的硬、脆、碎、塌复杂地层,特别是上部地层尤其破碎,勘探时采用跟管钻进保护孔壁。但跟管钻进过程中,遇到了岩样采取率低、跟管管靴断裂、跟管深度不足等技术难题。为解决所遇问题,研发了反循环潜孔锤同心跟管钻进钻具;利用ANSYS有限元软件对套管管靴结构参数进行了仿真分析研究,优化了管靴结构,提高了管靴使用寿命,提高跟管深度。
The stratum of molybdenum minerals in Luanchuan, especially the upper strata is a typical hard, brittle, broken, and collapsed formation. The experiment shows drilling with casing in this area low core recovery rate, casing shoe fractured easily, depth and other technical problem. In order to solve these problems encountered, concentric casing drilling bit of reverse circulation DTH hammer is designed, simulation analysis of casing shoe structure is also made by finite element software (ANSYS), the structure of casing shoe is optimized, the service life of casing shoe is improved, the depth of drilling casing is increased.

文章引用: 刘 军 (2013) 栾川钼矿复杂地层钻进跟管钻具研制。 矿山工程, 1, 1-4. doi: 10.12677/ME.2013.11001

参考文献

[1] 胡振阳. 潜孔锤反循环钻进技术在河南栾川钼矿复杂地层中的试验与理论研究[D]. 吉林长春: 吉林大学, 2004.

[2] 王茂森. 全孔反循环潜孔锤参数优化及其钻进工艺研究[D].吉林长春: 吉林大学, 2007.

[3] 张泽业, 唐雪云. 影响空气潜孔锤跟管钻进速度和跟管深度因素的分析[J]. 西部探矿工程, 1997, (5): 58-59, 71.

[4] 赵建勤, 李子章, 石绍云等. 空气潜孔锤跟管钻进技术与应用[J]. 探矿工程(岩土钻掘工程), 2008, (7): 55-59.

[5] 范黎明, 殷琨等. 栾川钼矿跟管钻进套管失效分析及优化设计[J]. 金属矿山, 2009, (9): 143-145.

[6] 耿瑞伦. 跟套管钻进技术及其应用[J]. 地质装备, 2000, 1(3): 11-14.

分享
Top