基于ANSYS的汽油机曲轴箱强度分析
Strength Analysis of the Gasoline Crankcase Based on ANSYS

作者: 丁攀 * , 马晓婉 :沈阳理工大学,沈阳;

关键词: 曲轴箱有限元强度分析Crankshaft Box Finite Element Method Strength Analysis

摘要:
本文针对某型号的汽油机曲轴箱强度不均匀的问题,基于ANSYS软件对其进行了建模仿真。完成了在第三缸做功时爆发力最强和侧推力最大的工况时,缸体的强度分布分析,并通过计算分析了仿真结果。

Abstract:
This article based on one gasoline engine which has the problem of crankcase intensity in homogeneity, the ANSYS software is used to establish the mode of it, made the simulation of the model. Completed the strength of the cylinder body distribution analysis, when third cylinder works most explosive and has the maximum thrust to the side of cylinder body.

文章引用: 丁攀 , 马晓婉 (2013) 基于ANSYS的汽油机曲轴箱强度分析。 交通技术, 2, 74-78. doi: 10.12677/OJTT.2013.21014

参考文献

[1] 廖日东, 左正兴, 樊利霞. 发动机零部件有限元技术应用的新进展[J]. 内燃学报, 1999, 17(2): 190-197.

[2] U. Yo. The role of static and dynamic finite element analysis in designing low noise cylinder blocka. SAE Paper 830251.

[3] R. M. Amundsen. Thermal design and analysis for the cryogenic MID AS experiment. SAE Transaction 972471, 1997: 911-919.

[4] 胡恩球. 有限元网格生成方法发展综述[J]. 计算机辅助设计与图形学学报. 1997, 19(4): 12-19.

[5] 张帆, 岑松. 非线形有限元分析与实例[M]. 北京: 科学出版社, 2005.

[6] C. C. J. French. Advanced techniqucs for engine research and design. Proceedings of the Institution of Mechanical Engineers, 1989, 203(D2): 169-183.

[7] 陈家瑞. 汽车构造(上册)[M]. 北京: 人民交通出版社, 1997.

分享
Top