等宽确动凸轮机构的设计
Synthesis of Constant-Breadth Cam Mechanisms

作者: 徐冠伦 * , 吴隆庸 :国立清华大学;

关键词: 定幅曲线速度瞬心凸轮轮廓曲率半径Curve of Constant Width Velocity Instant Center Cam Profile Radius of Curvature

摘要: 本文提供一种解析法用以设计等宽确动凸轮的轮廓。等宽确动凸轮机构的凸轮和从动件在任一时刻均有两个接触点,并且这两个接触点的连线必会垂直于从动件的接触平面。因为从动件的接触面间的距离固定,从动件前半周期和后半周期的运动规律有相依的函数关系,因此在前半周期所选定的从动件之运动规律亦同时决定了从动件在后半周期的运动规律。等宽确动凸轮的轮廓可以用解析方程式表示。本文提供一实例加以说明。

Abstract: This paper presents an analytical approach for determining the profile of the constant-breadth cam. At any instant there are two contact points between the cam and the follower, and the line passing through the two contact points must be perpendicular to both faces of the follower. The follower motion program can be designed for 180˚ of cam rotation, but in order to satisfy the constant-breadth condition, the follower motion program of the remaining 180˚ depends entirely upon that of the previous 180˚. The cam profile can be expressed analytically. An example is provided to illustrate the approach.

文章引用: 徐冠伦 , 吴隆庸 (2012) 等宽确动凸轮机构的设计。 机械工程与技术, 1, 1-6. doi: 10.12677/met.2012.11001

参考文献

[1] H. Nakazawa. Principle of precision engineering. Oxford: Ox- ford University Press, 1994: 96-98.

[2] J. C. Fisher. Curves of constant width from a linear viewpoint. Mathematics Magazine, 1987, 6(3): 131-140.

[3] F. Reuleaux. The kinematics of machinery: Outlines of a theory of machines. London: Macmillan, 1875, Reprinted 1963: 139- 146.

[4] P. W. Jenson. Cam design and manufacture, 2nd Edition. New York: Marcel Dekker, 1987: 134-137.

[5] H. A. Rothbart. Cam design handbook. New York: Mac-Graw Hill, 2004: 477-479.

[6] 石永刚, 徐振华. 凸轮机构设计[M]. 上海: 上海科学技术出版社, 1995: 161-167.

[7] S. G. Dhande, N. Rajaram. Kinematic analysis of constant- breadth cam-follower mechanisms. Transactions of the ASME, Journal of Mechanisms, Transmissions, and Automation in De- sign, 1984, 106(3): 214-221.

[8] 徐起贺, 王文深. 等宽凸轮机构的数学建模与动态仿真[J]. 机械传动, 2002, 2: 24-25, 75.

[9] E. E. Zayas, S. Cardona and L. Jordi. Analysis and synthesis of the displacement function of the follower in constant-breadth cam mechanisms. Mecha-nism and Machine Theory, 2009, 44: 1938-1949.

[10] Z. Ye, M. R. Smith. Synthesis of constant-breadth cam mecha- nisms. Mechanism and Machine Theory, 2002, 37(9): 941-953.

[11] K. Brunell. Constant di-ameter cams, their properties and design characteristics. Transactions of the ASME, Journal of Engineer- ing for Industry, 1962: 161-164.

[12] J. K. Davidson. Calculating cam profiles quickly. Ma-chine De- sign, 1978, 50(28): 151-155.

[13] 颜鸿森, 吴隆庸. 机构学[M]. 台北: 台湾东华书局股份有限公司, 2006: 268-285.

[14] L. I. Wu. Calculating conjugate cam profile by vector equation. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Me-chanical Engineering Science, 2003, 217(10): 1117-1123.

[15] J. Reeve. Cams for industry. London: Mechanical Engineering Publica-tions Limited, 1995: 90-98.

分享
Top