管壳式换热器三维自动化设计及软件开发
Automatic Three Dimensional Design for Tube-Shell Heat Exchanger and Software Development

作者: 王 坤 , 于庆波 * , 李玖重 , 秦 勤 :东北大学材料与冶金学院;

关键词: Solid Edge二次开发管壳式换热器工艺计算三维设计Redevelopment of Solid Edge Tube-Shell Heat Exchanger Technical Calculation Three Dimensional Design

摘要:
利用Visual BasicSolid Edge进行二次开发,实现了管壳式换热器三维自动化设计,并编写了相应的设计软件。软件采用模块化设计思想,主要分为工艺计算和三维图形输出两部分。工艺计算可实现管壳式换热器的热力计算和压降计算;三维图形是基于ActiveX Automation技术先采用参数化建模生成独立零件再由自底向上装配的方法生成。软件界面友好,人机交互能力强,能快速生成三维模型,有效提高了设计速度和设计质量。

Abstract:
Using Visual Basic to redevelop the Solid Edge, a software is developed to implement automatic three di- mensional drawing of tube-shell heat exchangers. According to the concept of modularization the software is divided into two parts: technical calculation and three dimensional drawing. The thermal calculations and the pressure drop calculations can be finished by the software; Based on the ActiveX Automation technology, using parametric modeling to generate the independent parts and then to generate three-dimensional drawing is output with bottom-up assembly method. At the same time, this software has friendly interfaces and a human-computer interaction environment. It will be benefit to the development of the three dimensional modeling, which can improve the design speed and design qual- ity.

文章引用: 王 坤 , 于庆波 , 李玖重 , 秦 勤 (2012) 管壳式换热器三维自动化设计及软件开发。 动力系统与控制, 1, 1-5. doi: 10.12677/dsc.2012.11001

参考文献

[1] 陈友文, 柴天佑. 基于双交叉限幅PID-RBR的加热炉温度控制[J]. 东北大学学报: 自然科学版, 2010, 9(31): 1217-1220.

[2] 吴国东, 尹清华, 华贲等. 管壳式换热器的优化选型[J]. 石油化工, 1994, 23(2): 100-104.

[3] 张冠敏, 潘继红, 杜文静. 管壳式换热器自动化设计及三维结构模拟[J]. 山东大学学报: 工学版, 2003, 33(4): 390-394.

[4] P. Gao, Z.-F. Sang. Three dimensional parameterized design of heat exchanger tube sheet based on solid works. 9th Interna-tional Conference on Computer-Aided Industrial Design and Concep-tual Design: Multicultural Creation and Design, 2008: 488-492.

[5] 任雷雷. 管壳式换热器设计选型软件系统开发[D]. 西安理工大学, 2006.

[6] X. H. Zhou, Y. J. Qiu, G. R. Hua, et al. A feasible approach to the integration of CAD and CAPP. Computer-Aided Design, 2007, 39(4): 324-338.

[7] W. J. Ding. Engineering design of heat exchang-ers based on solid edge modeling. Mechanical Science and Technology, 2006, 12: 1442-1446.

[8] L. Kong, J. Y. H. Fuh, K. S. Lee, et al. A windows-native 3D plastic injection mold design system. Journal of Materials Proc- essing Technology, 2003, 1-3: 81-89.

[9] K.-H. Chang, S.-H. Joo. Design parameterization and tool integration for CAD-based mechanism optimization. Advances in Engineering Soft-ware, 2006, 37(12): 779-796.

分享
Top