ATDM炼镁工艺的物料的导热系数测定
Study on Thermal Conductivity of Materials of ATDM Proc-ess

作者: 傅大学 , 张 伟 , 王耀武 , 彭建平 , 狄越忠 , 陶绍虎 , 冯乃祥 :东北大学材料与冶金学院;

关键词: 导热系数平板法还原ATDM工艺Thermal Conductivity Steady-State-Flat Method Reduction ATDM Process

摘要: 采用稳态平板法研究了ATDM工艺过程物料的导热系数。实验结果表明:温度升高,原料中铝粉添加量增加,CaF2添加量增加都能提高物料的导热系数。原料中铝的熔化对物料的导热系数影响较大。随着还原反应进行,物料的导热系数降低。添加CaF2将降低还原渣的导热系数。导热系数随温度的变化满足线性关系。

Abstract:

The thermal conductivity of ATDM process’ materials was investigated by steady-state-flat method. The results show that thermal conductivity increased with the increase of temperature or the added amount of Al or the added amount of CaF2. There is an important effect of melt of Al on the thermal conductivity of raw materials. The thermal conductivity of reduction slag decreased with the proceeding reduction reaction and it will be decreased further when CaF2 was added. It indicated a good linear relation between thermal conductivity and temperature.

文章引用: 傅大学 , 张 伟 , 王耀武 , 彭建平 , 狄越忠 , 陶绍虎 , 冯乃祥 (2012) ATDM炼镁工艺的物料的导热系数测定。 化学工程与技术, 2, 113-116. doi: 10.12677/HJCET.2012.24020

参考文献

[1] D. Eliezer, E. Aghion and F. H. Froes. Magnesium science, technology and applications. Advanced Performance Materials, 2002, 5: 201-212.

[2] G. Hanko, H. Antrekowitsch and P. Ebner. Recycling automotive magnesium scrap. Journal of Management, 2002, 54(2): 51-54.

[3] Z. Sun, H. Zhang, P. Li, B. Li and G. M. Lu. Modeling and simulation of the flow field in the electrolysis of magnesium. Journal of Management, 2009, 61(5): 29-33.

[4] O. A. Lebedev, Y. Brusakov and N. P. Shkuryakov. Express monitoring of MgCl2 concentration in the electrolyte of magnesium electrolyzers. Russian Journal of Applied Chemistry, 2005, 78(8): 1276-1279.

[5] H. E. Friedrich, B. L. Mordike. Magnesium technology. Berlin: Springer, 2006: 52.

[6] F. Gao, Z. R. Nie, Z. H. Wang, X. Z. Gong and T. Y. Zuo. Assessing en-vironmental impact of magnesium production using Pidgeon process in China. Transactions of Nonferrous Metals Society of China, 2008, 18(3): 749-754.

[7] 冯乃祥, 王耀武, 胡文鑫. 以MgO/CaO摩尔比大于1的物料为原料真空还原制取金属镁的方法[P]. 中国专利: 101942572A, 2011-01-12.

[8] 冯乃祥, 王耀武, 胡文鑫. 从以铝或铝合金为还原剂制取金属镁的副产物中提取氢氧化铝和氧化铝的方法[P]. 中国专利: 101845550A, 2010-09-29.

[9] 冯乃祥, 王耀武. 一种以菱镁石和白云石混合矿物为原料的真空热还原法炼镁技术[J]. 中国有色学报, 2011, 21(10): 2678-2686.

[10] W. X. Hu, N. X. Feng and Y. W. Wang. Magnesium production by vacuum alumino-thermic reduction of a mixture of calcined dolomite and calcined mag-nesite. 2011 Magnesium Technology. San Diego: The Minerals, Metals & Materials Society, 2011: 43- 47.

[11] Y. W. Wang, N. X. Feng, J. You, et al. Study on extracting aluminum hydroxide from reduction slag of magnesium smelting by vacuum aluminothermic reduction. 2011 Magnesium Technology. San Diego: The Minerals, Metals & Materials Society, 2011: 205-209.

[12] D. X. Fu, N. X. Feng, Y. W. Wang, et al. Comparison of extracting magnesium by aluminothermic reduction and Pidgeon process. 2012 Advanced Materials Research. Guangzhou: ICCEAM, 2012: 1779-1783.

[13] 梅鸣华, 李治, 黄文革. 耐火材料导热系数的几种测试方法[J]. 工业炉, 2010, 30(5): 35-38.

[14] 任泽霈, 蔡睿贤. 热工手册[M]. 北京: 机械工业出版社, 2002: 2-60.

[15] 蒋绍坚, 周孑民, 杨怀东等. Pn, Zn和Al在熔点附近的导热系数测试[J]. 金属学报, 2000, 36(3): 334-336.

[16] 梁连科, 杨怀, 郭仲文. 炉渣物理性质对电渣重熔过程电耗的影响[J]. 东北工学院学报, 1993, 14: 171-175.

[17] S. Musikant. Optical mate-rials. New York: Marcel Dekker Inc., 1985: 86.

[18] 李洪磊, 强康, 岑国平. 机场道面材料导热系数测定[J]. 路基工程, 2010, 5: 83-85.

分享
Top