斜板(管)沉降分离数学模型的构建与剖析
Establishing and Anatomizing with Respect to Inclined-Plate (Pipe) Sedimentation Separation Mathematical Models

作者: 付家新 * , 尹先清 :长江大学化学与环境工程学院,荆州; 张健 , 檀国荣 , 周薇 :海洋石油高效开发国家重点实验室,北京;中海油研究总院,北京;

关键词: 斜板(管)沉降模型设计参数建模与剖析Inclined-Plate (Pipe) Settlement Model Design Parameters Modeling and Anatomizing

摘要: 在油田污水处理过程中,斜板(或斜管)除油器用于强化油水分离、去除污水中的细小油滴,斜板(管)工艺结构尺寸的设计与优化是影响斜板(管)除油效率的关键。本文运用沉降理论,通过数学分析,针对3种水流形式,构建了8种物理模型,在此基础上建立了3套数学模型,为斜板(管)工艺结构的优化设计提供了可量化的理论依据;同时,对斜板(管)相关设计参数也进行了探讨。

Abstract: During oilfield produced water treatment, the inclined-plate (or beehive pipe ) deoiling device was used to enhance the effect of oil/water separation, remove exiguous oil droplets from sewage. The design and optimization of the plate (pipe) structure was naturally the key of the degreasing effect. Therefore, according to settlement theory and mathematical analysis, for the 3 kinds of water current forms, this text established 8 kinds of physical models, on this basis, 3 kinds of mathematical models were built to provide quantitative theoretical foundation for optimizing design of the plate (pipe) structure. At the same time, relevant design parameters of the inclined plate (pipe) were probed in the research.

文章引用: 付家新 , 张健 , 尹先清 , 檀国荣 , 周薇 (2011) 斜板(管)沉降分离数学模型的构建与剖析。 化学工程与技术, 1, 11-16. doi: 10.12677/hjcet.2011.12003

参考文献

[1] 李化民, 苏显举等. 油田含油污水处理[M]. 北京: 石油工业出版社, 1992: 4-8.

[2] 牛瑞霞, 染洪波. 油田水处理新技术的应用进展[J]. 石油化工应用, 2010, 29(1): 1-3.

[3] 付家新, 向问陶, 周薇等. JZ9-3平台除油罐斜管结构参数的设计与优化[J]. 化工进展, 2011, 30(9): 2090-2094.

[4] 尹先清, 游革新等. 斜管沉降罐的设计计算[J]. 油气田地面工程, 1997, 9: 57-58.

[5] 陈忠喜, 邓述波, 夏福军. 横向流除油器处理油田含油污水的研究[J]. 工业水处理, 2001, 21(1): 31-33.

[6] 邓述波, 周抚生, 陈忠喜. 聚丙烯酰胺对聚合物驱含油污水中油珠沉降分离的影响[J]. 环境科学, 2002, 23(2): 69-72.

[7] 上海市政工程设计院编. 斜板斜管沉淀[M]. 北京: 中国建筑工业出版社, 1978: 1-43.

[8] 许保玖. 给水处理理论[M]. 北京: 中国建筑工业出版社, 2004: 234-244.

分享
Top