基于Pro/Engineer的蜗杆程序化设计
The Programmed Design of Worm Based on Pro/Engineer

作者: 代超 , 徐兴亮 , 赵婷 , 胡景姝 :哈尔滨理工大学,黑龙江 哈尔滨;

关键词: 蜗杆传动程序化设计Pro/TOOLKITWorm Drive Programmed Design Pro/TOOLKIT

摘要: 本文以便携式小型旋耕机蜗杆减速器的设计方法为基础,使用Pro/ENGINEER的二次开发软件包Pro/TOOLKIT开发了蜗杆的程序化设计系统。该设计系统界面简单、直观,操作方便,降低了设计者的工作量,缩短了蜗杆蜗轮齿廓曲线绘制的设计周期,并易于进行蜗杆传动的运动仿真及蜗杆减速器的运动分析。

Abstract: Based on the design of worm transmission in compact type rotocultivators, Pro/TOOLKIT is applied to the development of a programmed design system for the design of worm. This programmed design system is characterized by a simple and visualized interface and easy operation, which saves the labor of the designers and shortens the design process of worm tooth-profile. This design system is also helpful in the motion simulation of worm transmission and motion analysis of worm reducer.

文章引用: 代超 , 徐兴亮 , 赵婷 , 胡景姝 (2017) 基于Pro/Engineer的蜗杆程序化设计。 机械工程与技术, 6, 39-44. doi: 10.12677/MET.2017.61006

参考文献

[1] 盛庆伟, 等. 基于Pro/E的发动机连杆设计系统开发[J]. 机械设计与制造, 2013(2): 94-99.

[2] 张继春. Pro/ENGINEER二次开发实用教程[M]. 北京: 北京大学出版社, 2003.

[3] 李世国. Pro/TOOLKIT程序设计[M]. 北京: 机械工业出版社, 2003.

[4] 陈天华. 面向对象程序设计与Visual C++6.0教程[M]. 北京: 清华大学出版社, 2013.

分享
Top