叶轮加工中心X轴滑座动态特性分析与优化
Dynamic Characteristic Analysis and Optimization of the X Axis Slide of Impeller Machining Center

作者: 陈达 :北京信息科技大学机电工程学院,北京;

关键词: 加工中心固有频率动态性能Machining Center Inherent Frequency Dynamic Characteristics

摘要: 叶轮是航空发动机的重要组成部分,需要具有高的加工精度和质量。以某机床厂生产的航空发动机叶轮专用加工中心X轴滑座为研究对象,采用有限元方法分析其动态特性。根据其固有频率和模态振型找出X轴滑座结构的薄弱环节,针对X轴滑座的薄弱环节提出优化设计方案,以提高X轴滑座的动态性能,为以后的设计提供了一定的参考。

Abstract: Impeller as an important part of the Aero-Engine should have a high machining accuracy and quality. The X-axis slide of Aero-Engine impeller dedicated machining center is taken as the re-search object, which was turned out by a machine tool factory, and its dynamic characteristics are studied by finite element analysis. The weaker part of the X-axis slide is founded according to the analysis of inherent frequency and modal shape, and as to the weaker part, optimization design scheme is put forward to improve the dynamic characteristics of the X-axis slide. This conclusion provides a certain reference to the future optimized design.

文章引用: 陈达 (2016) 叶轮加工中心X轴滑座动态特性分析与优化。 机械工程与技术, 5, 209-217. doi: 10.12677/MET.2016.53025

参考文献

[1] 吴玲丽. SGM50A卧式加工中心动态特性分析及关键部件的优化[D]. 南京: 南京理工大学, 2014.

[2] 陈小明. 飞机零件的高速高效加工[J]. 航空制造技术, 2004(04): 44-47.

[3] 徐开元, 徐武彬, 张宏献, 等. VMC-1000型立式加工中心立柱结构分析与动态设计[J]. 组合机床与自动化加工技术, 2010(4): 11-17.

[4] 汤艳云. 龙门加工中心结构薄弱环节动态特性优化[D]. 杭州: 浙江工业大学, 2013.

[5] Wang, F.Q., et al. (2010) Structural Dynamic Analysis and Optimization of Precision NC Machine Tool Bed Based on the Unit Structure. Applied Mechanics and Materials, 34-35, 44-47.
http://dx.doi.org/10.4028/www.scientific.net/AMM.34-35.44

[6] 成大先. 机械设计手册[M]. 第五版. 北京: 化学工业出版社, 2008.

分享
Top