基于SAP2000的立井井筒装备结构建模方法
Modeling Method for Structure of Shaft Equipment Based on SAP2000

作者: 王东权 , 靖洪淼 , 于广云 :中国矿业大学(徐州)力学与建筑工程学院,江苏 徐州;

关键词: 立井井筒装备SAP2000参数建模计算方法Shaft Equipment SAP2000 Parameterized Modeling Calculating Method

摘要:
为了开发用于计算立井井筒装备结构分析软件,首次提出基于SAP2000的立井井筒装备结构建模方法;首先依据井筒装备结构和各构件特点,将井筒装备结构分为5种类型,构建了立井井筒装备各构件位置坐标的数学模型,实现了立井井筒装备参数化建模;然后根据立井井筒装备各构件连接特点和边界特点,合理设置了模型中各构件的连接和边界,又根据立井井筒装备荷载水平力特性,确定了荷载水平力作用位置和工况组合;最后为开发基于SAP2000的立井井筒装备结构计算软件提供了依据。

Abstract: To develop structural analysis software for calculating shaft equipment, modeling method for structure of shaft equipment based on SAP2000 is firstly presented. First of all, based on the fea-ture of shaft equipment and each member, structure of shaft equipment is divided into five types. Mathematic model of each member of shaft equipment is established, meanwhile, parametric modeling for shaft equipment is realized. Then, according to the feature of connection and boun-daries, which belongs to the members of shaft equipment, the reasonable connection and boundaries of each member are set up in the model. On the basis of the load characteristics of horizontal force, the combination of the horizontal force’s working position and condition is determined. In the end, it is helpful for developing the structural analysis software for shaft equipment based on SAP2000.

文章引用: 王东权 , 靖洪淼 , 于广云 (2016) 基于SAP2000的立井井筒装备结构建模方法。 矿山工程, 4, 114-122. doi: 10.12677/ME.2016.43018

参考文献

[1] 北京金土木软件技术有限公司. SAP2000_API_-Documentation_chm [M]. 2009年第14版软件安装目录.

[2] 张月强, 焦春节, 丁洁民. 复杂高层结构从SAP2000到ABAQUS模型转换的关键问题及软件开发研究[J]. 建筑结构, 2013, 43(6): 54-57.

[3] 张建华, 郜殿伟, 黄珂, 等. 基于SAP2000的钢板筒仓参数化建模与分析[J]. 建筑科学与工程学报, 2013, 9(3): 25-29.

[4] 陈庆军, 谢小东, 郭金龙, 等. 利用.NET平台及SAP2000 API实现空间杆系结构的蒙板功能[J]. 空间结构, 2012, 18(2): 64-69.

[5] 王东权, 史天生, 刘志强, 等. 深立井刚性井筒装备结构的计算方法[J]. 中国矿业大学学报, 1997, 26(1): 5-8.

[6] 史天生, 田建胜. 刚性井筒装备水平作用力的工程计算法[J]. 中国矿业大学学报, 1995, 24(1): 1-7.

分享
Top