基于ANSYS的框架砌体填充墙温度应力分析
Analysis of Temperature Stress of Filled Walls in Framed Structures Based on ANSYS
作者: 胡合江 :同济大学土木工程学院,上海 ;
关键词: 数值模拟; 温度应力; 填充墙; 框架结构; 温度位移; Numerical Simulation; Temperature Stress; Filled Wall; Framed Structure; Temperature Displacement
摘要:Abstract: The filled wall has great influence on the bearing capacity, rigidity and deformation properties of framed structures. In the application, the cracking problem of masonry filled walls in framed structures is quite serious, and one of the main reasons is the temperature stress. This paper conducted the simulation analysis of a simple framed structure with filled walls through ANSYS software, then observed the change rule of the maximum displacement, the maximum first prin-cipal stress and the average wall stress by changing the span, window area of the filled wall and setting up structural measures (structural column or ledge beam), in order to search for measures of reducing temperature stress and supply the technical support for engineering.
文章引用: 胡合江 (2016) 基于ANSYS的框架砌体填充墙温度应力分析。 土木工程, 5, 68-73. doi: 10.12677/HJCE.2016.53009
参考文献
[1] 周海水. 带填充墙框架结构非线性有限元分析[D]: [硕士学位论文]. 南昌: 南昌大学, 2009.
[2] 苑振芳, 刘斌. 关于砌体结构裂缝控制措施的建议[J]. 建筑砌块与砌块建筑, 2000(8), 12-16.
[3] 樊小卿. 温度作用与结构设计[J]. 建筑结构, 1999, 20(2): 43-51.
[4] 中国气象科学数据共享服务网[DB/OL]. http://cdc.cma.gov.cn/
[5] 施楚贤. 砌体结构[M]. 北京: 中国建筑工业出版社, 2002.
[6] GB50010-2010, 混凝土结构规范[S]. 北京: 中国建筑工业出版社, 2010.
[7] 王铁梦. 建筑物的裂缝控制[M]. 上海: 上海科技出版社, 1987.
[8] Zucchini, A. and Lourenco, P.B. (2002) A Micro-Mechanical Model for the Homogenization of Masonry. International Journal of Solid Sand Structure, 39, 3233-3255.