光纤端面加工技术及其发展趋势
Optical Fiber End Face Processing Technology and Its Development Trend

作者: 陈 兵 * , 舒启林 :沈阳理工大学机械工程学院,辽宁 沈阳;

关键词: 光纤端面加工研磨抛光微磨削Optical Fiber Face Processing Grinding and Polishing Micro Grinding

摘要:
回顾光纤的发展历程及国内外光纤端面加工技术的发展情况,本文针对国内外光纤的发展的需求、历程,进行简单归纳。着重对光纤研磨抛光、光纤熔融拉锥、光纤光栅刻写、光纤化学腐蚀以及光纤微磨削加工等光纤端面加工技术进行分析与总结,并进一步阐述光纤端面加工技术的发展趋势。

Abstract: In this paper, the development of optical fiber and the optical fiber end face processing technology are reviewed all over the world. Firstly, the need and course of the development of optical fiber are simply summed up. Then, the analysis is focused on lapping, fused taper, rating carving, chemical corroding, and micro grinding processing of optical fiber, etc. At last, the further trend of optical fiber end face processing technology is discussed.

文章引用: 陈 兵 , 舒启林 (2016) 光纤端面加工技术及其发展趋势。 机械工程与技术, 5, 1-8. doi: 10.12677/MET.2016.51001

参考文献

[1] 黄本华. 光纤发展趋势及最新技术探讨[J]. 现代传输, 2013(1): 62-64.

[2] 吕璠. 光纤通信的发展趋势及应用[J]. 科技信息, 2009(23): I0039-I0040.

[3] Kao, K.C. and Hockham, G.A. (1966) Dielectric-Fibre Surface Waveguides for Optical Frequencies. Proceedings of the Institution of Electrical Engineers-London, 113, 1151-1158.
http://dx.doi.org/10.1049/piee.1966.0189

[4] Snyder, A.W. (1972) Coupled-Mode Theory for Optical Fibers. Journal of the Optical Society of America, 62, 1267- 1277.
http://dx.doi.org/10.1364/JOSA.62.001267

[5] Wijngaard, W. (1973) Guided Normal Modes of Two Parallel Circular Dielectric Rods. Journal of the Optical Society of America, 63, 944-950.
http://dx.doi.org/10.1364/JOSA.63.000944

[6] Hill, K.O., Fuji, Y., Johnson, D.C. and Kawasaki, B.S. (1978) Photosensitivity in Optical Fiber Waveguides-Applica- tion to Reflection Filter Fabrication. Applied Physics Letters, 32, 647.
http://dx.doi.org/10.1063/1.89881

[7] Bergh, R.A., Kotler, G. and Shaw, H.J. (1980) Single-Mode Fiber Optic Directional Coupler. IEEE Electronics Letters, 16, 260-261.
http://dx.doi.org/10.1049/el:19800191

[8] Wong, P., Wang, T. and Ho, C. (2002) Optical Fiber tip Fabricated by Surface Tension Controlled Etching. Solid-State Sensor, Actuator and Microsystems Workshop, 6, 94-100.

[9] Huang, H., Chen, W.K. and Yin, L. (2004) Micro/Meso Ultra Precision Grinding of Fiber Optical Connectors. Precision En-gineering, 28, 95-105.
http://dx.doi.org/10.1016/j.precisioneng.2003.08.001

[10] Kapron, F.P., Keck, D.B. and Maurer, R.D. (1970) Radiation Losses in Glass Optical Waveguides. Applied Physics Letters, 17, 423.
http://dx.doi.org/10.1063/1.1653255

[11] 白银冰. 光纤微加工技术及器件应用研究[D]: [博士学位论文]. 杭州: 浙江大学, 2013.

[12] 陈哲, 沈丽达, 江沛凡, 刘林和. 光纤侧边抛磨装置及其工艺方法[P]. 中国专利, CN1631616A, 2005-06-29.

[13] 刘德福, 段吉安, 钟掘. 光纤端面研磨加工的表面质量[J]. 机械工程学报, 2006, 42(2): 187-191.

[14] 帅希士. 电加热式熔融拉锥机的运动控制研究[D]: [硕士学位论文]. 长沙: 中南大学, 2006.

[15] 武延荣, 郭丽霞, 薛文瑞, 周国生. 单偏振光子晶体光纤[J]. 光学学报, 2007, 27(4): 593-597.

[16] 方宏, 娄淑琴, 任国斌, 郭铁英, 简水生. 非均匀孔径光子晶体光纤的模式截止[J]. 中国激光, 2006, 33(4): 493- 498.

[17] Wadsworth, W.J., Witkowska, A., Leon-Saval, S. and Birks, T. (2005) Hole Inflation and Tapering of Stock Photonic Crystal Fibres. Optics Express, 13, 6541-6549.
http://dx.doi.org/10.1364/OPEX.13.006541

[18] Tong, L., Gattass, R.R., Ashtcom, J.B., He, S., Lou, J., Shen, M., Maxwell, I. and Mazur, E. (2003) Subwavelength Diameter Silica Wires for Low-Loss Optical Wave Guiding. Nature, 426, 816-819.
http://dx.doi.org/10.1038/nature02193

[19] Wang, Y.-P., Wang, D.N., Jin, W., Rao, Y.-J. and Peng, G.-D. (2006) Asymmetric Long Period Fiber Gratings Fabricated by Use of Laser to Carve Periodic Grooves on the Optical Fiber. Applied Physics Letters, 89, Article ID: 151105.

[20] Corres, J.M., Matias, I.R., Bravo, J. and Arregui, F.J. (2008) Tapered Optical Fiber Biosensor for the Detection of Anti-Gliadin Antibodies. Sensors and Actuators B: Chemical, 135, 166-171.
http://dx.doi.org/10.1016/j.snb.2008.08.008

[21] Fang, X., Liao, C.R. and Wang, D.N. (2010) Femtosecond Laser Fabricated Fiber Bragg Grating in Microfiber for Refractive Index Sensing. Optical Letters, 35, 1007-1009.
http://dx.doi.org/10.1364/OL.35.001007

[22] Hoffmann, P., Dutoit, B. and Salathé, R.-P. (1995) Comparison of Mechanically Drawn and Protection Layer Chemically Etched Optical Fiber Tips. Ultramicroscopy, 61, 165-170.
http://dx.doi.org/10.1016/0304-3991(95)00122-0

[23] Lippold, M., Patzig-Klein, S. and Kroke, E. (2011) HF-HNO3-H2SO4/H2O Mixtures for Etching Multicrystalline Silicon Surfaces Formation of NO2+ Reaction Rates and Surface Morphologies. Zeitschrift fur Naturforschung B, 66, 155- 163.
http://dx.doi.org/10.5560/ZNB.2011.66b0155

[24] Milind, S.K. and Henry, F.E. (2000) Acid-Based Etching of Silicon Wafers: Mass-Transfer and Kinetic Effects. Journal of the Electrochemical Society, 147, 176-188.
http://dx.doi.org/10.1149/1.1393172

[25] Chryssis, A.N., Lee, S.M., Lee, S.B., Saini, S.S. and Dagenais, M. (2005) High Sensitivity Evanescent Field Fiber Bragg Grating Sensor. IEEE Photonics Technology Letters, 17, 1253-1255.
http://dx.doi.org/10.1109/LPT.2005.846953

[26] 钟年丙, 王永忠, 廖强, 朱恂, 陈蓉. 流动腐蚀方式对石英光纤湿腐蚀特性的影响[J]. 光学精密工程, 2013, 21(8): 1966-1973.

[27] 吕玉山, 王运江, 于湖平. 斜面60度光纤透镜抛光接触状态的分析[J]. 工具技术, 2010, 44(8): 91-96.

[28] 郑青竹. 微细磨削性能及微径砂轮磨损试验研究[D]: [硕士学位论文]. 哈尔滨: 哈尔滨工业大学, 2011.

[29] 吴晓芳, 吕玉山, 舒启林. 光纤端面透镜微磨削加工试验研究[J]. 组合机床与自动化加工技术, 2015(2): 144-147.

[30] 高然, 江毅. 微纳加工技术下光纤传感器的研究及应用[D]: [博士学位论文]. 北京: 北京理工大学, 2015.

[31] Alwis, L., Sun, T. and Grattan, K.T.V. (2013) Fibre Optic Long Period Grating Based Humidity Sensor Probe Using a Michelson Interferometric Arrangement. Sen-sors and Actuators B: Chemical, 178, 694-699.
http://dx.doi.org/10.1016/j.snb.2012.11.062

[32] 陈超. 耐高温光纤光栅的飞秒激光制备及应用研究[D]: [博士学位论文]. 长春: 吉林大学, 2014.

分享
Top