应力测量方法
Methods for Stress Measurement

作者: 姜国利 , 王江涌 :汕头大学物理系,广东 汕头;

关键词: 传统的应力测量方法深度剖析方法Traditional Methods for Stress Measurement Depth Profiling Method

摘要:
本文对应力测量方法进行了评述和展望。主要介绍了多种传统测量应力的方法及原理,如小孔法、X射线衍射法、磁测法、超声波法、裂纹柔度等方法。并且提出了潜在可以用来表征薄膜界面间应力的一种新方法——溅射深度剖析定量分析。

Abstract: The methods for stress measurement are reviewed and discussed, focusing on the principles and application of several traditional methods, such as Hole method, X-ray diffraction method, Magnetic method, Ultrasonic method, crack compliance method and so on. A new promising method, quantitative sputter depth profiling, is proposed for characterizing the stress gradient at interface.

文章引用: 姜国利 , 王江涌 (2016) 应力测量方法。 材料科学, 6, 11-25. doi: 10.12677/MS.2016.61002

参考文献

[1] 刘伟香, 邓朝晖. 工程陶瓷磨削表面残余应力测试[J]. 现代制造工程, 2005(2): 99-102.

[2] 吕克茂. 残余应力测定的基本知识——第四讲X射线应力测定方法(一) [J]. 理化检验-物理分册, 2007, 43(7): 349-354.

[3] 金属研究所疲劳研究组. 入射线无负η倾角侧倾法X射线应力测定技术[J]. 金属学报, 1997, 13(Z1): 1-22.

[4] 于利根, 白辰东, 陈华, 徐可为, 何家文. Seemann-Bohlin薄膜应力测试方法的修正[J]. 金属学报, 1993(4): B187- B192.

[5] 徐可为, 高润生, 于利根, 何家文. 薄膜应力测定的X射线掠射法[J]. 物理学报, 1994, 43(8): 1295-1300.

[6] 何家文. 提高淬火钢X射线应力测定准确度——兼评平行光束法[R]. 科学技术报告, 西安: 西安交通大学, 1975.

[7] D.拉达伊, 著. 焊接热效应温度场、残余应力、变形[M]. 熊第京, 郑朝云, 史耀武, 译. 北京: 机械工业出版社, 1997.

[8] 王姝驭, 刘丽鹃, 陈喜平, 等. 能量色散法在铁单晶应力测量中的应用[J]. 物化检验-物理分册, 2012, 48(7): 425- 427.

[9] 文西芹, 刘成文. 基于逆磁致伸缩效应的残余应力检测方法[J]. 传感器技术, 2002, 21(3): 42-44.

[10] 徐虹, 滕宏春, 崔波, 等. 残余应力非破坏性测量技术的发展现状简介[J]. 理化检验-物理分册, 2003, 39(11): 595-598.

[11] 李强, 周则恭. 基于磁弹性仪实测加工残余应力改进曲轴加工工艺[J]. 机械工程与自动化, 1992(2): 4-6.

[12] 殷春浩, 刘海顺, 张雷. 一种测量钢材残留应力的磁性各向异性方法[J]. 测试技术学报, 2007, 21(1): 28-32.

[13] 蒋刚, 谭明华, 王伟明, 何闻. 残余应力测量方法的研究现状[J]. 机床与液压, 2007, 35(6): 213-220.

[14] Kion, G.S., et al. (1978) Acoustoelastic Imaging of Stress Fields. Journal of Applied Physics, 50, 2607-2613.
http://dx.doi.org/10.1063/1.326268

[15] Hsu, N.N. (1974) Acoustical Birefringence and the Use of Ultrasonic Wave for Experimental Stress Analysis. Experimental Mechanics, 14, 169-176.

[16] 亚敏著. 云纹干涉钻孔法测量残余应力的实验研究与应用[D]: [博士学位论文]. 北京: 清华大学, 2003.

[17] Jassby, K. and Saltone, D. (1982) Use of ultrasonic Rayleigh Waves of the Measurement of Applied Biaxial Surface Stresses in Aliuminum 2024-T351 Alloy. Materical Evaluation, 40, 198-205.

[18] 陈惠南, 潘安平, 张如一. 盲孔法测量残余应力的微机处理系统[J]. 机械强度, 1986(3): 37-38.

[19] 侯海量, 朱锡, 刘溺泉. 盲孔法测量92lA钢焊接残余应力的应变释放系数的研究[J]. 船舶工程, 2003, 25(1): 57- 60.

[20] 袁发荣, 伍尚礼. 残余应力测试与计算[M]. 长沙: 湖南大学出版社, 1987.

[21] 斐怡, 包亚峰, 唐慕尧. 盲孔法测定时计算公式中A、B值的研究[J]. 机械强度, 1997, 19(1): 18-21.

[22] 陈惠南. 盲孔法测量残余应力A、B系数计算公式讨论[J]. 机械强度, 1989, 11(2): 31-36.

[23] 陆才善. 残余应力测试——小孔释放法[M]. 西安: 西安交通大学出版社, 1991.

[24] Nawwar, A.M., Melachlan, K. and Shewchuk, J. (1976) A Modified Hole-Drilling Technique for Determining Residual Stresses in Thin Plate. Experimental Mechanics, 16, 226-232.
http://dx.doi.org/10.1007/BF02329273

[25] 赵海燕, 裴怡, 史耀武, 汪辉. 用小孔释放法测量焊接高残余应力时孔边塑性变形对测量精度的影响及修正方法[J]. 机械强度, 1996, 18(3): 17-20.

[26] 李广铎, 刘柏梁, 李本远. 孔边塑性变形对测定焊接残余应力精度的影响[J]. 焊接学报, 1986, 7(2): 7-93.

[27] 陆才善, 侯德门. 高残余应力钻孔法测量[J]. 机械强度, 1988, 10(1): 34-38.

[28] 戴福隆, 亚敏, 谢惠民, 吕坚. 云纹干涉与钻孔法测量残余应力的实验方法与系统[J]. 实验力学, 2003, 18(3): 313-318.

[29] 王秋成, 柯映林, 邢鸿燕. 板类构件内部残余应力测试技术研究[J]. 浙江大学学报: 工学版, 2005, 39(3): 381-384.

[30] 王秋成, 柯映林, 章巧芳. 7075铝合金板材残余应力深度梯度的评估[J]. 航空学报, 2003, 24(4): 336-338.

[31] Prime, M.B. (1999) Residual Stress Measurement by Successive Extension of a Slot: The Crack Compliance Method. Applied Mechanics Reviews, 52, 75-96.
http://dx.doi.org/10.1115/1.3098926

[32] Prime, M.B. and Hill, M.R. (2002) Residual Stress, Stress Relief, and in Homogeneity in Aluminum Plate. Scripta Materialia, 46, 77-82.
http://dx.doi.org/10.1016/S1359-6462(01)01201-5

[33] 赵升升, 华伟刚, 杜昊, 宫骏, 孙超, 李家宝. 一种测量硬质薄膜残余应力的新方法[J]. 金属学报, 2008, 44(1): 125-128.

[34] Suresh, S. and Giannakopoulos, A.E. (1998) A New Method for Estimating Residual Stresses by Instrumented Sharp Indentation. Acta Materialia, 46, 5755-5767.
http://dx.doi.org/10.1016/S1359-6454(98)00226-2

[35] Lee, Y.-H. and Kwon, D. (2002) Residual Stress in DLC/Si and Au/Si Systems: Application of a Stress-Relaxation Model to the Nanoindentation Technique. Journal of Materials Research, 17, 901-906.
http://dx.doi.org/10.1557/JMR.2002.0131

[36] Lee, Y.-H. and Kwon, D. (2003) Measurement of Residual-Stress Effect by Nanoindentation on Elastically Strained (100) W. Scripta Materialia, 49, 459-465.
http://dx.doi.org/10.1016/S1359-6462(03)00290-2

[37] Lee, Y.-H. and Kwon, D. (2004) Estimation of Biaxial Surface Stress by Instrumented Indentation with Sharp Indenters. Acta Materialia, 52, 1555-1563.
http://dx.doi.org/10.1016/j.actamat.2003.12.006

[38] Larché, F. and Cahn, J. (1973) A Linear Theory of Ther-mochemical Equilibrium of Solids under Stress. Acta Metallurgica, 21, 1051-1063.
http://dx.doi.org/10.1016/0001-6160(73)90021-7

[39] Cahn, J.W. and Larche, F.C. (1983) An Invariant Formula-tion of Multicomponent Diffusion in Crystals. Scripta Metallurgica, 17, 927-932.
http://dx.doi.org/10.1016/0036-9748(83)90264-8

[40] Chakraborty, J. (2005) Diffusion in Stressed Thin Films. Universität Stuttgart, Stuttgart.

[41] Chakraborty, B.R., Dilawar, N., Pal, S. and Bose, D.N. (2002) SIMS Characteri-zation of GaAs MIS Devices at the Interface. Thin Solid Films, 411, 240-246.
http://dx.doi.org/10.1016/S0040-6090(02)00277-8

[42] Bukaluk, A. (2000) Influence of Depth Resolution on In-terdiffusion Measurements in Polycrystalline Cu/Pd Multilayers. Surface and Interface Analysis, 30, 597-602.
http://dx.doi.org/10.1002/1096-9918(200008)30:1<597::AID-SIA827>3.0.CO;2-K

[43] Balogh, Z., Erdélyi, Z., Beke, D.L., Portavoce, A., Girardeaux, C., Bernardini, J. and Rolland, A. (2009) Determination of Grain Boundary Diffusion Coefficients in C-Regime by Hwang-Balluffi Method: Silver Diffusion in Pd. Defect and Diffusion Forum, 289-292, 763-767.
http://dx.doi.org/10.4028/www.scientific.net/DDF.289-292.763

[44] Wang, J.Y., He, D., Zalar, A. and Mittemeijer, E.J. (2006) Interdiffusion in Microstructurally Different Si/Al Multilayered Structures. Surface and Interface Analysis, 38, 773-776.
http://dx.doi.org/10.1002/sia.2189

[45] Bukaluk, A. and Bała, W. (1990) AES Depth Profile Studies of Interdiffusion in Thin Polycrystalline Au-Ag Multilayer Films. Applied Surface Science, 45, 57-64.
http://dx.doi.org/10.1016/0169-4332(90)90020-Z

[46] Zhang, J., Hu, X.S., Xi, J.H., Kong, Z. and Ji, Z.G. (2013) Depth Profiling of Al Diffusion in Silicon Wafers by Laser-Induced Breakdown Spectroscopy. Journal of Ana-lytical Atomic Spectrometry, 28, 1430-1435.
http://dx.doi.org/10.1039/c3ja50115a

[47] 刘毅. 溅射深度剖析定量分析及其在薄膜材料中的应用[D]: [硕士学位论文]. 汕头: 汕头大学, 2014.

分享
Top