整体式热流道热嘴易断裂问题探讨
Discussion on the Problem of Breakable Nozzle of Integral Hot Runner

作者: 王 焕 * , 张 茜 , 钟少基 , 黄诗君 :广东工业大学材料与能源学院,广东 广州;

关键词: 热流道断裂热嘴针阀Hot Runner Fracture Hot Nozzle Needle Valve

摘要:
热流道中热嘴断裂严重影响了整体式热流道的使用寿命,制约了热流道技术在模具中的推广和应用,为了解决断裂问题,本文就此展开讨论。结合热嘴自身结构和使用环境因素综合考虑,归纳出四个主要因数:螺纹连接的缺陷、温度的影响、针阀冲击、注射压力,同时对每一种影响因数进行了详细的计算。针对断裂现象提出了三种改进方案。改进后的热流道系统断裂现象明显减少,极大地提高了系统的可靠性和使用寿命。

Abstract: Nozzle fracture of hot runner severely affects the overall service life of hot runner, restricting the promotion and application of hot runner technology in the mold. In this paper, we discussed the fracture problem in order to solve it. Taking into account the structure and use environment of the nozzle, four main factors of the fracture problem were summarized: threaded connection defect, temperature effect, needle valve shock, and injection pressure. And then each impact factor was calculated in detail. Aiming at the fracture, three improvement projects were also proposed. Frac-ture had been reduced significantly in the improved hot runner system, greatly enhancing the re-liability and service life.

文章引用: 王 焕 , 张 茜 , 钟少基 , 黄诗君 (2015) 整体式热流道热嘴易断裂问题探讨。 机械工程与技术, 4, 261-269. doi: 10.12677/MET.2015.44030

参考文献

[1] 潘建新, 王爱民, 何文学. 手机面壳注射模设计[J]. 模具制造, 2006(5): 33-35.

[2] 吴国强, 何长华, 耿景都, 沈鸿冰, 侯向敏. 钢管塔锻造法兰连接螺栓的受力计算[J]. 电力建设, 2009, 30(10): 1-5.

[3] 朱重庆, 张先鸣. 高强度螺栓在输电铁塔上的应用及发展[C]//中国金属学会. 全国金属制品信息网第23届年会暨2013金属制品行业技术信息交流会论文集, 2013.

[4] 姜明亮. 液压注塑机加热系统的分析与改进[D]: [硕士学位论文]. 兰州: 兰州理工大学, 2008.

分享
Top