Numerical Simulation and Study of Stress for Rolling Textured Surface
Abstract: The band steel rolling process was simulated with ANSYS finite element simulation method. The rolling force working conditions were obtained and the hemispherical structure and the composite coating material deformation on the surface of rolling were evaluated. Further, the influence of band steel drawing velocity on the formation of the band steel surface morphology and forming quality was analyzed. The influences of transition story thickness and rolling surface morphology on the texturing ball stress were analyzed. Research results would provide theoretical basis for studying the characteristics of the textured rolls surface.
文章引用: 卫芳芳 , 张少睿 (2015) 轧辊表面毛化应力的数值模拟与研究。 机械工程与技术， 4， 254-260. doi: 10.12677/MET.2015.44029
 今中诚. 薄钢板表面粗糙度与成形性能关系的研究[J]. 汽车工艺与材料, 1997(9): 22-27.
 周家琮. 冷轧轧辊毛化技术[J]. 钢铁钒钛, 1996, 17(3): 1-9.
 Iwadoh, S., Kuwamoto, H. and Sonoda, S. (1989) An Investigation of the Mechanism of Work Roll Wear in Cold Rolling. Tetsu-to-Hagane (Journal of Iron and Steel Institute of Japan), 75, 2059-2066.
Du, D., He, Y.F., Sui, B., et al. (2005) Laser Texturing of Rollers by Pulsed Nd:YAG Laser. Journal of Materials Processing Technology, 161, 456-461.
Li, Z., Yang, M.J., Liu, W., et al. (2006) Investigation on Crater Morphology by High Repetitive Rate YAG Laser- Induced Discharge Texturing. Surface and Coatings Technology, 200, 4493-4499.
 刘红斌, 万大平, 胡德金. 激光毛化表面温度与应力的数值模拟与实验研究[J]. 材料热处理学报, 2008, 29(4): 181-184.