大功率可编程直流电流源监控系统的开发
Development of Monitoring System on Programmable High-Power DC Current Source

作者: 季三飞 , 同向前 , 黄金亮 :西安理工大学自动化与信息工程学院,陕西 西安;

关键词: LabVIEW串行通信监控系统直流电流源LabVIEW Serial Communication Monitoring System DC Current Source

摘要: 本文针对可编程直流电流源输出电流的幅值、频率、波形可设定的要求,设计了电流源的系统组成方案和电流参考波形的调制算法。可编程直流电流源由基于PC机的上位机监控系统和基于DSP控制的DC-DC变换器组成,两者通过RS485工业通信总线联系。基于LabVIEW的上位机监控系统的开发可实现对可编程直流电流源输出电流波形的调制和监控。实际装置的运行结果表明,上位机监控系统的设计满足装置的功能要求,操作简明,运行可靠。

Abstract: According to the output current amplitude, frequency and waveform requirements of the pro-grammable DC current source, the structure scheme and the modulation algorithm were designed. The programmable DC current source is composed of PC monitoring system and DC-DC converter controlled by DSP. PC communicates with DSP by the industrial communication bus RS-485. The PC monitoring system based on LabVIEW is developed, which can achieve the modulation and monitoring on DC current source output. The operation results show that the PC monitoring system satisfies the requirements of device, with simple operation and high reliability.

文章引用: 季三飞 , 同向前 , 黄金亮 (2015) 大功率可编程直流电流源监控系统的开发。 仪器与设备, 3, 106-113. doi: 10.12677/IaE.2015.34016

参考文献

[1] 程学庆. LabVIEW图形化编程与实例应用[M]. 北京: 中国铁道出版社, 2005.

[2] 杨乐平, 李海涛, 杨磊. Lab-VIEW程序设计与应用[M]. 北京: 电子工业出版社, 2005.

[3] 符晓, 朱洪顺. TMS320F2833x DSP应用开发与实践[M]. 北京: 北京航空航天大学出版社, 2013.

[4] 董翰川, 郭勇, 李文杰. LabVIEW串口通信在数据采集中的应用[J]. 微型机与应用, 2011, 30(23): 63-68.

[5] 张桐, 陈国顺, 王正林. 精通LabVIEW程序设计[M]. 北京: 电子工业出版社, 2008.

[6] 林若波. 基于LabVIEW的电机调速数据采集与处理系统[J]. 测控技术, 2012, 31(7): 16-19.

分享
Top