渐开线弧齿圆柱齿轮副抗偏载特性的研究
Anti-Bias Load Capacity Analysis of the Involute Arc Cylindrical Gear

作者: 刘祖奇 * , 宋爱平 , 张益汉 , 罗 超 :扬州大学机械工程学院,江苏 扬州;

关键词: 弧齿圆柱齿轮抗偏载有限元分析Arc Cylindrical Gear Anti-Bias Load Capacity Finite Element Analysis

摘要:
在齿轮副传动过程中,常因加工误差、安装误差、受力变形引起齿轮副偏载。分析了直齿圆柱齿轮副、斜齿圆柱齿轮副的偏载产生机理及齿轮修形的局限性,提出应用新型弧齿圆柱齿轮,来提高齿轮副传动承载能力与抗偏载能力。基于弧齿圆柱齿轮独特的几何特征分析了弧齿圆柱齿轮抗偏载的原理,采用有限元分析方法分别对直齿、斜齿、弧齿圆柱齿轮副进行受力分析,结果显示弧齿圆柱齿轮可以明显改善齿轮副齿面受力状态,具有明显的抗偏载特性。

Abstract: The processing errors, installation errors and deformation often lead to Gears partial load during gear pair transmission process. The paper analyzes generating mechanism of partial load and limitations of gear modification about the spur gear pair as well as the Helical Gear Pair, proposing to use this new arc cylindrical gear to improve the carrying capacity and anti-bias load capacity of the auxiliary drive gear. The paper analyzed the principle of anti-bias arc cylindrical gear carrier based on the geometric characteristics of the arc cylindrical gear, using the finite element method to analyze the stress of straight teeth, Helical and arc tooth cylindrical gear pairs respectively, showed that the arc cylindrical gear pairs can significantly improve the stress state of tooth surface, with a clear anti-side load characteristics.

文章引用: 刘祖奇 , 宋爱平 , 张益汉 , 罗 超 (2015) 渐开线弧齿圆柱齿轮副抗偏载特性的研究。 机械工程与技术, 4, 209-217. doi: 10.12677/MET.2015.43023

参考文献

[1] 王致坚, 伍利群, 罗魁元 (2005) 渐开线齿轮传动的噪声产生与防治. 机床与液压, 8, 208-210.

[2] 李杰, 孙青军, 王乐勤 (2009) 渐开线齿轮的接触分析. 工程设计学报, 16, 27-31.

[3] 冯高头 (2004) 齿轮常见误差的原因分析及解决方法(上). 现代零部件, 10, 70-76.

[4] 宋爱平, 易红, 汤文成, 等 (2006) 渐开线弧齿圆柱齿轮及其啮合特性. 中国机械工程, 9, 1888-1892.

[5] 宋爱平, 吴伟伟, 高尚, 等 (2010) 弧齿圆柱齿轮理想几何参数及其加工方法. 上海交通大学学报, 44, 1735-1740.

[6] 王成, 方宗德, 海涛 (2011) 人字齿轮均在载特性的理论分析与实验研究. 兵工学报, 32, 74-77.

分享
Top