新型布氏硬度计在火电施工现场的应用实例
Instance of a New Type of Brinell Hardness Tester Applied in the Thermal Power Construction Site

作者: 叶朝峰 , 杨 慧 :河南第一火电建设公司,河南 郑州;

关键词: 布氏硬度计火电施工应用焊后硬度Brinell Hardness Tester Thermal Power Construction Application Hardness after Welding

摘要:
对某电厂2 × 660 MW超超临界火力发电机组的P92钢主蒸汽和再热热段管道焊缝硬度,应用新型布氏硬度计进行工业实践。对比里氏硬度计与布氏硬度计的工作原理及其优缺点,探讨此种新型布氏硬度计的技术合理性、现场适用性,以期真实、准确的反映火电施工现场管道焊缝的焊后热处理硬度。结果表明,该新型布氏硬度计具有示值重复性好、精度高、数据真实的优点。

Abstract: Based on the new kind of Brinell hardness tester, the author measured the weld hardness of the reheat pipe weld and main Steam pipe adopted P92 steel used in superheater of ultra-supercriti- cal coal-fired unit with 2 × 660 MW located in one power plant. The working principle as well as the advantages and disadvantages of Leeb hardness tester and Brinell hardness tester was compared, and the technical rationality and site suitability of this new type of Brinell hardness tester were also discussed so as to truly and accurately reflect the heat treatment hardness of weld joint after welding in the thermal power construction site. Results showed that this new type of Brinell hardness tester has advantages including indicating value of good repeatability, high precision, and real data.

文章引用: 叶朝峰 , 杨 慧 (2015) 新型布氏硬度计在火电施工现场的应用实例。 机械工程与技术, 4, 72-79. doi: 10.12677/MET.2015.41005

参考文献

[1] 张恒岩, 等 (2010) 浅谈影响里氏硬度计测量精度的因素. 计测技术, 2, 50-51.

[2] 强敏 (2005) 里氏硬度检测的主要影响因素分析. 冶金标准化与质量, 5, 5.

[3] 黄山松 (2013) 里氏硬度计的测量原理与准确性分析. 科技创业家, 4, 52.

[4] 薄鑫涛 (2013) 硬度与强度的差别. 热处理, 6, 73.

[5] 朱旭明, 李矛, 翁俊, 等 (2010) 一种便携式布氏硬度计. 上海计量测试, 1, 21.

[6] 周启玲 (2002) 对正确使用布氏硬度测试技术几个问题的探讨. 现代机械, 4, 99.

[7] 徐连勇, 李蒙 (2013) P92钢异常硬度安全性能的研究. 天津大学, 天津.

分享
Top