连铸板坯动态二冷控制系统开发与应用
Development and Application of Dynamic Secondary Cooling Control System on Continuous Casting Slab

作者: 侯安贵 , 闵 义 , 姜茂发 :东北大学材料与冶金学院,辽宁 沈阳;

关键词: 连铸凝固传热动态二冷系统开发Continuous Casting Solidification and Heat Transfer Dynamic Secondary Cooling System Development

摘要:
在合理假设的基础上,建立了连铸板坯一维传热跟踪模型,连铸坯表面温度和凝固坯壳厚度验证表明,模型计算精度可以满足在线应用的需要。以热跟踪模型为基础,结合连铸坯表面温度控制目标制定,采用增量PID算法建立了二冷水流量调整模型,采用模块化设计,开发了连铸板坯二冷动态控制系统。应用结果表明,二冷水量可根据拉速变化迅速调整,实现了连铸板坯表面温度的稳定控制。

Abstract: A one-dimensional heat tracing model of continuous casting slab was built based on the reasonable assumption. The validation results of the slab surface temperature and the solidified shell thickness show that, the calculation accuracy of the built model is high enough which can meet the requirement of online application. Based on the heat tracing model, a model of adjustment of sec-ondary cooling water flow rate was built via increment PID algorithm combined with planning of the control objectives of slab surface temperature, and the dynamic secondary cooling control system was established via modularity designing. Application results showed that, the flow rate of secondary cooling water can be adjusted rapidly with the casting speed, and the slab surface tem-perature can be controlled stably.

文章引用: 侯安贵 , 闵 义 , 姜茂发 (2015) 连铸板坯动态二冷控制系统开发与应用。 冶金工程, 2, 15-21. doi: 10.12677/MEng.2015.21003

参考文献

[1] Barozzi, S. and Fontana, P. (1986) Computer control and optimization of secondary casting during continuous casting. Iron and Steel Engineer, 11, 21-26.

[2] 蔡开科 (2003) 连铸二冷区凝固传热及冷却控制. 河南冶金, 11, 3-7.

[3] Kametani, H. (1998) Fractal analysis of the surface cracks of continuously cast steel slabs. Metallurgical and Meterials Transactions B, 6, 1261-1267.

[4] Okuno, K. and Naruwa, H. (1987) Dynamic spray cooling control system for continuous casting. Iron and Steel Engineer, 4, 34-38.

[5] Kondo, O., Hamada, K., Kuribayashi, T., et al. (1993) New dynamic spray control system for secondary cooling zone of continuous casting machine. 76th Steelmaking Conference Proceedings, Iron and Steel Society, Dallas, 309-314.

[6] Morwald, K., Dittenberger, K. and Hohenbicher, G. (1997) Improvement of Secondary Cooling Control by On-Line Temperature Calculation. 56th Ironmaking Conference Proceedings, Iron and Steel Society of AIME, Chicago, 647- 653.

[7] Hardin, R.A., Kapoor, K.A. and Beckermann, C. (2003) A transient simulation and dynamic spray cooling control model for continuous steel casting. Metallurgical and Materials Transactions B, 3, 297-306.

[8] 张晋格, 王卓军 (1995) 计算机控制原理与应用. 电子工业出版社, 北京.

分享
Top