GC-MS法测定苯胺法合成2-巯基苯并噻唑的废树脂
Determination of Composition in Spent Resins from the Aniline Process Adopted to the Synthesis 2-Mercaptobenzothiazole by Gas Chromatography-Mass Spectrometry

作者: 张家丽 , 张梅梅 , 张圣光 , 赵建宏 , 程相林 , 王留成 :郑州大学化工与能源学院,河南 郑州;

关键词: 气相色谱–质谱法(GC-MS)2-巯基苯并噻唑废树脂苯胺法Gas Chromatography-Mass Spectrometry (GC-MS) 2-Mercaptobenzothiazole Spent Resins Aniline Process

摘要:
采用气相色谱–质谱法(GC-MS)对工业苯胺法合成2-巯基苯并噻唑(促进剂M)的副产废树脂进行了定性、定量测定。废树脂经四氢呋喃溶解后,采用GC-MS法测定,样品中分离的各种成分用NIST08谱库进行对照检索,采用面积归一法,计算出各化合物成分的相对含量。共鉴定了废树脂中的7种有机化合物,其中2-巯基苯并噻唑(M)和苯并噻唑(BT)的相对含量最高,分别为29.2%、31.1%。苯胺含量为6.2%,2,6-二叔丁基-4-甲基苯酚含量为17.4%,苯并噻唑衍生物含量共为14.2%,所鉴定的7种有机化合物峰面积之和占到总峰面积的98.1%。

Abstract: The relative content and constituents of spent resins from the aniline process adopted to the syn-thesis 2-mercaptobenzothiazole (the Accelerator M) were analyzed by gas chromatography-mass spectrometry (GC-MS). After being dissolved in tetrahydrofuran, spent resins were measured by GC-MS and identified by NIST08. The relative content of each component was determined by area normalization. Total 7 constituents were identified in spent resins, wherein the relative contents of 2-mercaptobenzothiazole (M) and benzothiazole (BT) were the highest, accounting for 29.2% and 31.1% respectively. The contents of aniline, 2,6-Di-tert-butyl-4-methylphenol and benzothiazole derivative were 6.2%, 17.4% and 14.2%, taking 98.1% of the total peak area.

文章引用: 张家丽 , 张梅梅 , 张圣光 , 赵建宏 , 程相林 , 王留成 (2015) GC-MS法测定苯胺法合成2-巯基苯并噻唑的废树脂。 分析化学进展, 5, 1-6. doi: 10.12677/AAC.2015.51001

参考文献

[1] 刘安华, 张利利, 温永向 (2005) 促进剂M的生产及其废渣利用. 橡胶工业, 12, 728-731.

[2] 尹志刚, 陈培同, 钱恒玉 (2007) 促进剂M的合成及其应用进展. 合成橡胶工业, 5, 398-402.

[3] Gradwell, M.H.S. and McGill, W.J. (1995) Sulfur vulcanization of polyisoprene accelerated by benzothiazole derivatives. I. Comparison of sulfur and 2-mercaptobenzothiazole accelerated reactions. Journal of Applied Polymer Science, 58, 2185-2191.

[4] Ajmal, M., Mideen, A.S. and Quraishi, M.A. (1994) 2-hydrazino-6-methyl-benzothiazole as an effective inhibitor for the corrosion of mild steel in acidic solutions. Corrosion Science, 36, 79-84.

[5] Achim, K., Martin, J. and Thorsten, R.J. (2004) Determination of benzothiazoles from complex aqueous samples by liquid chromatography-mass spectrometry following solid-phase extraction. Journal of Chromatography A, 1058, 81- 86.

[6] 李道荣, 胡长文 (2004) 银、铑、铱与2-巯基苯并噻唑的配合物的高压液相色谱研究. 分析实验室, 1, 68-70.

[7] 张翠兰 (1997) 抗氧剂BHT和食品级BHT国内市场应用情况. 石化技术, 4, 251-254.

分享
Top