多孔介质X-CT图像的三维重建
Three Dimensional Reconstruction of Porous Media X-CT Image

作者: 邱伟国 , 陈宝明 , 云和明 , 蔡鹏飞 :山东建筑大学热能工程学院,济南;

关键词: 多孔介质三维重建图像处理ImageJPorous Media 3D Reconstruction Image Processing ImageJ

摘要:
ImageJ这款开放源代码的图像处理软件在多孔介质重建方面介绍很少。通过使用ImageJ软件对一组海绵的X-CT切片进行处理,着重介绍了ImageJ在X-CT图像三维重建中的应用。本文给出了进行三维图像重建主要的操作方法和几种多孔介质重建的图,为更好地使用ImageJ对多孔介质X-CT图像三维重建,给出了进行三维图像重建主要的操作方法和重建结果。对于重建的三维多孔介质模型,利用数值模拟的方法为进一步研究微观流动及传热机理奠定了良好的基础。

Abstract: ImageJ, an open source code image processing software, is rarely introduced in porous media re-construction. Through the use of ImageJ software, a group of sponge X-CT slices was processed. The application of ImageJ in the X-CT image 3D reconstruction is introduced. In order to better use the ImageJ to three-dimensionally reconstruct the porous media X-ray CT image, this paper gives the main methods of operation and the results of the three-dimensional image reconstruction. For establishing the three-dimensional reconstruction of the porous media model, this paper used the method of the numerical simulation which lays a good foundation for the further research on the micro flow and the heat transfer mechanism.

文章引用: 邱伟国 , 陈宝明 , 云和明 , 蔡鹏飞 (2014) 多孔介质X-CT图像的三维重建。 渗流力学进展, 4, 59-64. doi: 10.12677/APF.2014.44007

参考文献

[1] Narsilio, G.A., Buzzi, O.P., Fityus, S.G., et al. (2009) Upscaling of Navier-Stokes equations in porous media: Theoret-ical, numerical and experimental approach. Computers and Geotechnics, 36, 1200-1206.

[2] Nuzzo, S., Peyrin, F., Martin, E., et al. (2001) Assessment of bone mineral content from 3-D synchrotron radiation microtomography images. IEEE Transactions on Nuclear Science, 48, 859-863.

[3] Lee, S.W., Kim, H.K., Cho, G., et al. (2002) A 3-D X-ray microtomographic system with a CMOS image sensor. IEEE Transactions on Nuclear Science, 48, 1503-1505.

[4] Sylvie, C., Marc, D. and Zlatko, D. (2002) Real-time flat-panel pixel imaging system and control for X-ray and neutron detection. IEEE Transactions on Nuclear Science, 49, 159-163.

[5] 黄丰 (2008) 多孔介质模型的三维重构研究. 博士论文, 中国科学技术大学, 合肥.

[6] 王波, 宁正福, 姬江 (2012) 多孔介质模型的三维重构方法. 西安石油大学学报 (自然科学版), 27, 54-57, 61.

[7] (2014) National Institutes of Health. http://rsb.info.nih.gov/ij/index.html

[8] 王亮 (2013) 基于数字图像处理技术的泥沙颗粒分析. 硕士论文, 重庆交通大学, 重庆.

[9] 孙水法, 董方敏 (2013) ImageJ图像处理与实践. 国防工业出版社, 北京.

[10] 雷建锋, 汪伟 (2013) 基于OpenCV的图像阈值分割研究与实现. 现代电子技术, 36, 73-76.

分享
Top