基于Bragg光纤光栅对干式空心电抗器固化温升的研究
Study on Curing Temperature of Dry-Type Air-Core Reactor Based on Fiber Bragg Grating

作者: 伍阳阳 , 徐 鹏 , 张 洁 :华北电力大学,保定; 田 沛 , 王明达 , 李江浩 :云南电网公司研究生工作站,昆明; 谭向宇 , 刘友宽 :云南电力试验研究院(集团)有限公司电力研究院,昆明;

关键词: 干式空心电抗器Bragg光纤光栅固化温升包封层温度应变Dry-Type Air-Core reactor Fiber Bragg Grating Curing Temperature Coating Layer Temperature Strain

摘要:
干式空心电抗器的固化温升作为其生产流程中最关键环节之一,其环境温度的变化直接影响到干抗的匝间绝缘。本文结合厂家多年固化温升的经验,设计了一套基于Bragg光纤光栅的在线监测系统,该系统可对干式空心电抗器包封层的温度和应变进行在线测量。通过对干抗的现场固化温升实验的在线测量,得出了各包封层的温度和应变变化趋势。该研究成果将为变电站的干式空心电抗器实时监测提供重要的理论依据和设备支持。

Abstract: Curing temperature rise of dry-type air-core reactor is one of the most key links in the production process. The environment temperature changes directly affect the turn-to-turn insulation of dry resistance. In this paper, combining the manufacturers’ many years of experience of curing tem-perature rise, it designs a set of on-line monitoring system based on fiber Bragg grating. This sys-tem can do on-line measurement of dry-type air-core reactor temperature and strain of the coating layer. Through the online measurement of the curing temperature experiments of dry resistance, change trends of temperature and strain in each coating layer can be concluded. The results of the study will provide important theoretical basis and equipment support for the real-time monitoring of dry-type air-core reactor in transformer substation.

文章引用: 伍阳阳 , 田 沛 , 谭向宇 , 刘友宽 , 徐 鹏 , 张 洁 , 王明达 , 李江浩 (2014) 基于Bragg光纤光栅对干式空心电抗器固化温升的研究。 电气工程, 2, 82-89. doi: 10.12677/JEE.2014.24011

参考文献

[1] 夏长根 (2009) 一起35 kV干式并联空心电抗器故障分析. 电力电容器与无功补偿, 5, 43-45.

[2] 刘海莹, 魏宾 (2004) 干式空心电抗器的运行分析及故障处理. 高压电器, 3.

[3] 何东平, 孙白 (2004) 35 kV干式空芯并联电抗器运行情况及故障电抗器的解剖分析. 电力设备, 2, 48-51.

[4] 魏鹏, 李丽君, 郭俊强 (2008) 光纤Bragg光栅应力传感中温度交叉敏感问题研究. 应用光学, 1, 105-109.

[5] 李爱群, 周广东 (2009) 光纤Bragg光纤传感器测试技术研究进展与展望(I). 东南大学学报(自然科学版), 6, 1298-1306.

分享
Top