不同工艺对AZ91D镁合金表面强化的研究
Research on the Surface Strengthening of AZ91D Magnesium Alloy Treated by Different Processes

作者: 高雯雯 , 胡前生 , 张庆茂 , 郭 亮 :华南师范大学广东省微纳光子功能材料与器件重点实验室,广州;

关键词: 镁合金表面强化化学氧化热喷涂激光强化Magnesium Alloy Surface Strengthening Chemical Oxidation Thermal Spray Laser Strengthening

摘要:

镁合金的很多优良物理性能使得镁合金在工业上有广泛的应用,但是镁合金硬度低,不耐磨损等缺陷严重限制了其的应用。系统的比较了化学氧化工艺,热喷涂金属涂层工艺,和激光强化工艺对AZ91D镁合金表面耐磨性能的影响,结果表明:各种工艺均能增加其表面硬度,降低其摩擦系数,X射线衍射分析表明经各种工艺强化后,试样表面组织有所改变,其中β-Mg17Al12的含量都有所增加。

Abstract:
Magnesium (Mg) alloys have a wide variety of industrial applications because of their good physical properties. However, the poor corrosion resistance, wear resistance and mechanical properties of Mg alloys limit the applications of their performance. This paper compared the influences on the surface wear-resisting performance of AZ91D magnesium alloy treated by chemical oxidation process, thermal spray process and laser process. The detailed microstructure and phase analysis of the melting layer were carried out by XRD and SEM. The micro-hardness and the wear properties of the treated layer were improved after processing. Owing to the increase of the hard phase β-Mg17Al12, the micro-hardness, wear resistance and corrosion resistance of the melted layer increased.

文章引用: 高雯雯 , 胡前生 , 张庆茂 , 郭 亮 (2014) 不同工艺对AZ91D镁合金表面强化的研究。 材料科学, 4, 87-95. doi: 10.12677/MS.2014.43014

参考文献

[1] 白木, 周洁 (2002) 车用材青睐镁合金. 金属世界, 2, 4-5.

[2] 吕宜振, 王渠东, 等 (2001) 镁合金在汽车上的应用现状. 铝镁通讯, 2, 53-55.

[3] 曾荣昌, 等 (2001) Mg合金的最新发展及应用前景. 金属学报, 7, 681-683.

[4] Bonora, P.L., Andrei, M., Eliezer, A., et al. (2002) Corrosion behaviour of stressed magnesium alloys. Corrosion Science, 4, 729-749.

[5] Udhayan, R. and Devendra, P.B. (1996) On the corrosion behaviour of magnesium and its alloys using electrochemical techniques. Journal of Power Sources, 1, 103-107.

[6] Liu, J.R., Guo, Y.N. and Huang, W.D. (2006) Study on the corrosion resistance of phytic acid conversion coating for magnesium alloys. Surface & Coatings Technology, 3, 1536-1541.

[7] 席俊杰, 党旭丹 (2011) 新型镁合金及其热处理和表面改性技术. 金属热处理, 2, 1-6.

[8] 陈先华, 刘娟, 张志华, 潘复生 (2011) 镁合金热处理的研究现状及发展趋势. 材料导报, 23, 142-145.

[9] 周游, 姚颖悟, 吴坚扎西, 刘伟星 (2013) 镁合金化学转化膜的研究进展. 电镀与精饰, 5, 15-18.

[10] 徐宏妍, 王强, 张治民, 张宝红 (2008) 镁合金环保型化学氧化处理. 材料保护, 9, 20-23.

[11] Altun, H. and Sen, S. (2007) The effect of PVD coatings on the wear behaviour of magnesium alloys. Materials Characterization, 10, 917-921.

[12] Chen, C.J., Wang, M.C., Wang, D.S., et al. (2007) Microstructure and corrosion behavior of Mg-Nd coatings on AZ3lmagnesium alloy produced by high-energy micro-arc alloying process. Journal of Alloys and Compounds, 1, 321-326.

[13] Zhang, Y.K., Chen, J.F., Lei, W.N., et al. (2008) Effect of laser surface melting on friction and wear behavior of AM50 magnesium alloy. Surface and Coatings Technology, 14, 3175-3179.

[14] 肖红军, 彭云, 马成勇, 等 (2005) 激光表面改性.表面技术, 4, 10-12.

[15] Abbas, G., Li, L., Ghazanfar, U., et al. (2006) Effect of high power diode laser surface melting on wear resistance of magnesium alloys. Wear, 1, 175-180.

[16] Abbas, G., Liu, Z. and Skeldon, P (2005) Corrosion behaviour of laser-melted magnesium alloys. Applied Surface Science, 1, 347-353.

[17] Abbas, G., Li, L., Ghazanfar, U. et al. (2006) Effect of high power diode laser surface melting on wear resistance of magnesium alloys. Wear, 1, 175-180.

[18] Liu, S.Y., Hu, J.D., Yang, Y., et al. (2005) Microstructure analysis of magnesium alloy melted by laser irradiation. Applied Surface Science, 5, 1723-1731.

[19] 高亚丽, 王存山, 刘红宾, 等 (2007) 高功率激光熔凝AZ91HP镁合金组织和性能. 中国激光, 7, 1019-1024.

分享
Top