混流制造过程产品碳足迹核算方法研究
The Study about the Calculation Method of Product Carbon Footprint during the Flow Manufacturing Process

作者: 田有全 , 刘 琼 :华中科技大学,武汉;

关键词: 低碳制造产品碳足迹Low Carbon Manufacturing Product Carbon Footprint

摘要:
针对目前产品全生命周期碳排放核算过程中缺乏基础数据,同时为了解决混流制造过程造成产品碳足迹计算不准确问题,提出一种制造过程碳排放与产品对应关系的产品制造过程碳足迹计算方法。最后通过简单实例计算,验证方法的有效性。

Abstract:
For the lack of basic data for calculating carbon emission during the product life-cycle, and in order to solve the problem of the inaccurate calculation of product carbon footprint caused by flow manufacturing process, a calculation method of product carbon footprint in manufacturing process based on correspondence relations between the product and carbon emission is put forward. Finally, a case study is used to verify the effectiveness of the research.

文章引用: 田有全 , 刘 琼 (2014) 混流制造过程产品碳足迹核算方法研究。 低碳经济, 3, 1-6. doi: 10.12677/JLCE.2014.31001

参考文献

[1] Mayyas, A.T., Qattawi, A., Mayyas, A.R., et al. (2012) Life cycle assessment-based selection for a sustainable lightweight body- in-white design. Energy, 39, 412-425.

[2] 陶雪飞 (2011) 陶瓷企业低碳制造系统模式及评估与建模方法.

[3] 尹瑞雪, 曹华军, 李洪丞等 (2012) 砂型铸造生产系统碳排放量化方法及应用. 计算机集成制造系统, 5, 1071-1076.

[4] 汪劲松, 段广洪, 李方义等 (1999) 基于产品生命周期的绿色制造技术研究现状与展望. 计算机集成制造系统-CIMS, 4, 2-9.

[5] 孙良峰, 裘乐淼, 张树有等 (2012) 面向低碳化设计的复杂装备碳排放分层递阶模型. 计算机集成制造系统, 11, 2381- 2390.

[6] Zhang, X.F., Zhang, S.Y., Hu, Z.Y., et al. (2012) Identification of connection units with high GHG emissions for low-carbon product structure design. Journal of Cleaner Production, 27, 118-125.

[7] 唐任仲, 贾顺, 吕景祥 (2011) 基于活动的产品车间制造过程碳排量计算方法. 机电工程, 6, 639-644.

[8] Sinden, G. (2008) PAS_2050.

[9] GaBi Paper (2011) Clip tutorial-part 1.

分享
Top