基于ADAMS的柔性混凝土泵车臂架仿真研究
Simulation of Flexible Arms of Truck-Mounted Concrete Pump Based on ADAMS

作者: 张 芸 :东南大学自动化学院,南京; 叶 桦 :复杂工程系统测量与控制教育部重点实验室,南京;

关键词: 柔性混凝土泵车臂ADAMS起制动控制脚本仿真模态阻尼比Flexible Arms of Truck-Mounted Concrete Pump ADAMS Starting and Braking Simulation Script Modal Damping Ratio

摘要:
混凝土泵车臂架模型的正确创建对控制算法的研究有至关重要的作用。本文运用Pro/E建立与实物等比例大小的泵车模型,并导入ANSYS中进行网格划分,在ADAMS中替代刚性臂,构建柔性的混凝泵车臂架系统。在ADAMS中编写仿真脚本文件,结合传感器的使用,对泵车工作时常见的起动和制动过程进行了仿真。通过对柔性体模态阻尼比的设置,使柔性泵车模型如实反映混凝土泵车的工作状态,以此验证模型的正确性,为进一步的控制算法研究奠定了基础。

Abstract:
Creating a correct model of the arms of truck-mounted concrete pump plays a crucial role in studying on the control algorithm. In this paper, we establish a model with the same size of a real truck-mounted concrete pump in the software Pro/E and then export its arms into ANSYS for meshing. In ADAMS, we replace the rigid arms with those flexible ones to build a system of flexible arms of truck-mounted concrete pump truck. In addition, we write a simulation script file, combining with the use of sensors, to simulate the process in which the pump starts and brakes as it works in a real working condition. We set the flexible arms’ modal damping ratio to make the model reflect the working condition of a real concrete pump correctly. So we can verify the correctness of the model we establish and carry out further researches about the control algorithm based on the flexible model.

文章引用: 张 芸 , 叶 桦 (2013) 基于ADAMS的柔性混凝土泵车臂架仿真研究。 软件工程与应用, 2, 138-142. doi: 10.12677/SEA.2013.26024

参考文献

[1] 任庆杰 (2011) 混凝土泵车智能臂架系统仿真的设计与实现. 硕士论文, 东南大学, 南京.

[2] 冯波, 黄东胜, 文珍 (2012) 基于柔性多体动力学的混凝土泵车臂架仿真分析. 装备制造技术, 1, 16-18.

[3] 伦智达, 方俊元, 贾子文 (2012) 基于ADAMS的刚柔耦合机器人动力学仿真. 仪器仪表与分析监测, 12, 20-22.

[4] 于荣 (2013) 混凝土泵车臂架半实物仿真控制系统. 硕士论文, 东南大学, 南京.

[5] 侯钧严等 (2008) Pro/Engineer中文野火版3.0基础精讲. 西北工业大学出版社, 西安.

[6] 胡红军等 (2008) ANSYS 10.0材料工程有限元分析实例教程. 电子工业出版社, 北京.

[7] 王斌华, 吕彭民 (2011) 五节臂混凝土泵车的有限元建模与模态分析. 广西大学学报, 5, 735-739.

[8] 杨双龙, 战强, 马晓辉等 (2010) 基于ADAMS的锁紧臂机构的动力学仿真及参数化分析. 机械设计与制造, 11, 26-28.

[9] 李增刚 (2006) ADAMS入门详解与实例. 国防工业出版社, 北京.

分享
Top