﻿ 基于ANSYS的回转台车架的有限元分析与结构改进

# 基于ANSYS的回转台车架的有限元分析与结构改进Finite Element Analysis and Structural Improvement of Slewing Bogie Based on ANSYS

Abstract:
The slewing mechanism of stacker reclaimer is an important part of the cantilever rotary action. The role is to drive the superstructure part of the bucket wheel, luffing mechanism as well as with weight in the horizontal plane. The slewing ring is the core part of slewing mechanism. The statical (Finite Element Analysis) FEA for slewing bogie based on ANSYS shows the total deformation diagram and the equivalent stress diagram. The comparison between the statical FEA results and the theoretical calculation results can confirm that the structure satisfies the operation requirements. Meanwhile, this paper also presents structural improvement for the slewing bogie which provides the necessary basis for the slewing mechanism design.

[1] 王玉兴, 唐艳芹, 魏民祥等. 悬臂式斗轮堆取料机的发展及研究动向[J]. 建筑机械, 1999, 8: 25-29.

[2] 吕顺, 闵振东, 甘绍敏. 臂式斗轮机回转机构的工作原理及特点分析[J]. 机械工程师, 2010, 9: 161-163.

[3] 张应迁, 张洪才. ANSYS有限元分析从入门到精通[M]. 北京:人民邮电出版社, 2010: 8-9.

[4] 王社. 材料力学[M]. 西安: 西北工业大学出版社. 2008: 169- 170.

[5] 夏连明, 刘波, 陶文秀. 基于SolidWorks与AYSYS的挖掘机动臂有限元分析[J]. 矿山机械, 2012, 4: 32-35.

[6] 时公贺, 梁岗. 基于SolidWorks和ANSYS的大型全回转架梁起重机结构强度分析[J]. 计算机辅助工程, 2009, 1: 60-65.

[7] 宋剑峰. ANSYS有限元分析[M]. 北京: 中国铁道出版社, 2012: 88-89.

Top