涂布时能自动收白边胶带装置的研究
Study on Devices Automatically Wind White Edge of Adhesive Tapes While Coating

作者: 荣 蓉 * , 孙军华 , 陈荣镜 :江苏春兰清洁能源研究院有限公司,泰州;

关键词: 镍氢电池泡沫镍极板胶带Ni-MH Battery Foamed Nickel Plate Adhesive Tape

摘要:
镍氢电池极板在涂浆生产的烘烤后,需去除粘在镍带上的胶带,由于胶带与镍带间具有一定的粘连性,在生产时,胶带边缘常被人为撕破和漏撕现象,导致后续生产极片的报废率较大,针对此问题,研究一种涂浆生产中自动收胶带工装,使收胶带的速度与生产线涂浆速度一致,且镍带两侧均能同步收胶带,并能自动地将胶带收到工装的胶带棍上,可随时卸下胶带卷更换。

Abstract:
After the paste production’s baking, the Nickel-hydrogen battery needs to remove tape which is sticking on the nickel belt. Due to the adhesiveness between tape and the nickel belt, in production, edge of tape is often artificially torn or forgotten which leads to the high scrap rates of subsequent production of pole piece. To solve this problem, researching an automatic tape coating production tool to make consistent speed of receiving the tape and paste production, and both sides of the nickel belt can simultaneously receive tape, besides, it can automatically put the tape on the tape stick and replace the tape roll at any time.

文章引用: 荣 蓉 , 孙军华 , 陈荣镜 (2013) 涂布时能自动收白边胶带装置的研究。 机械工程与技术, 2, 65-68. doi: 10.12677/MET.2013.22012

参考文献

[1] H.-S. Yan. A methodology for creative mechanism design. Mechanism and Machine Theory, 1992, 27(3): 235-242.

[2] S. S. Rao. Engineering optimization—Theory and practice. New York: John Wiley, 1996.

[3] 机械设计手册编委会, 编制. 机械设计手册[M]. 北京: 机械工业出版社, 2004.

[4] 张鄂. 机械工程优化设计[M]. 北京: 科学出版社, 2008.

[5] 胡文绩, 主编, 简明工程力学[M]. 成都: 西南交通大学出版社, 2009.

[6] 王宏, 主编. 工程力学[M]. 北京: 清华大学出版社, 2009.

[7] 郑树琴, 主编. 机械设计基础[M]. 北京: 国防工业出版社, 2008.

分享
Top