﻿ 最小流量阀的数值分析及结构优化

# 最小流量阀的数值分析及结构优化Numerical Simulation and Structure Optimization of the Minimum Flow Valve

Abstract:
Based on three-dimensional numerical simulation results, the minimum flow valve is studied under different opening level. The flow inside the valve was controlled by the Reynolds averaged Navier-Stokes equations together with the continuity equation. The RNG k-epsilon turbulence model was selected to govern the turbulence characteristics. Pressure and velocity distributions in the flow fields were obtained and analyzed under every opening level. The varia- tion curves of the loss coefficient and the flow rate along with the opening level were obtained to study the valve per- formance. The location where the major pressure loss happening was found by analyzing the pressure distribution. Then, the improvement method was proposed. The results of the valve with the new structure show that the pressure loss is decreased and the impaction of the fluid to the valve is alleviated.

[1] 蒋旭平, 王海民, 钟方胜, 陈明涛. 迷宫式最小流量阀的流动特性研究[J]. 流体机械, 2009, 37(5): 9-12.

[2] 张雨润, 陈意秋. 调节阀流量特性探索[J]. 阀门, 1997, 3: 15- 19.

[3] 徐锡年, 孙华蔬, 彭宇宇等. 调节阀流量特性理论选用方法和研究[J]. 炼油化工自动化, 1992, 2: 51-59.

[4] 郑建农, 孙叶柱. 进口电站阀门选型分析[J]. 热力发电, 2007, 36(2): 83-84.

[5] 贾青, 陶正良. 从对我国电站调节阀的调研看其现状及发展前景[J]. 水利电力机械, 2005, 27(1): 8-10.

[6] V. B. Kakuzin. Experience in operating the water-injection sys- tem control valves at power station boilers. Thermal Engineering, 2002, 49(4): 300-305.

[7] 阎志敏. 给水泵再循环调节阀的设计与控制[J]. 发电设备, 2008, 23(4): 332-334.

[8] 俞天存. 给水泵最小流量阀选型分析[J]. 青海电力, 2007, 26(1): 53-55.

Top