屏蔽电机温度场分析
Analysis of Temperature Field of the Canned Motor

作者: 杨文奕 , 王华生 :北京航天发射技术研究所,北京; 孟繁东 :南车株洲电力机车研究所有限公司,株洲;

关键词: 屏蔽电机有限体积温度场准确计算Canned Motor Finite Volume Method Temperature Field Accurate Calculation

摘要:
屏蔽电机结构复杂、损耗较大,主要应用在化工液体的输送上,其安全稳定的运行十分重要。本文以一台屏蔽电机为例,根据流体力学及传热学理论,建立三维流体场与三维温度场耦合的求解域物理模型,采用有限体积法计算额定工况下电机的温度分布。通过计算,揭示了屏蔽电机内各主要部件的温度分布规律,得到定子股线、铁心温升较高,转子铁心、导条温升较低,最高温升发生在定子股线上端部的结论。可为屏蔽电机的结构设计以及更大容量屏蔽电机温度场的准确计算提供理论依据。

Abstract:
The canned motor which has complex structure and large loss is mainly used in the transportation of liquid chemical, and its safe operation and stability is very important. Taken a canned motor as an example, physical model of three dimensional fluid and temperature coupled field was established according to hydromechanics and heat transfer theory. The temperature distribution of motor under nominal working condition was calculated by using finite volume method. By calculation, revealing the regularity of temperature distribution of canned motor and obtaining the conclu- sion that the temperature rise of stator strands and stator core are high, the temperature rise of rotor bars and rotor core are low, the location of maximum temperature rise of motor is in the upper end of stator stands, which provided the the- ory basis for structure design and accurate calculation of larger capacity canned motor.

文章引用: 杨文奕 , 王华生 , 孟繁东 (2013) 屏蔽电机温度场分析。 电力与能源进展, 1, 72-76. doi: 10.12677/AEPE.2013.12013

参考文献

[1] 梁超国. 屏蔽泵的结构、原理及其应用[J]. 化工设备设计, 1998, 35(1): 44-49.

[2] 霍菲阳, 李勇, 李伟力等. 大型空冷汽轮发电机定子通风结构优化方案的计算与分析[J]. 中国电机工程学报, 2010, 30(6): 69-74.

[3] D. A. Staton, A. Cavagnino. Convection heat trans-fer and flow calculations suitable for electric machines thermal models. IEEE Transactions on Industrial Electronics, 2008, 55(10): 3509-3516.

[4] 姚若萍, 饶芳权. 蒸发冷却水轮发电机定子温度场研究[J]. 中国电机工程学报, 2003, 23(6): 87-90.

[5] M. S. Rajagopal, K. N. Seetharamu, P. A. Aswatha, et al. Finite element analysis of radial cooled rotating electrical machines. International Journal of Numerical Methods for Heat & Fluid Flow, 1999, 9(1): 18-38.

[6] A. Boglietti, A. Cavagnino, M. Lazzari, et al. A simplified ther- mal model for vari-able-speed self-cooled industrial induction motor. IEEE Transactions on Industry Applications, 2003, 39(4): 945-952.

[7] 温志伟, 顾国彪. 实心磁极同步电动机转子温度场计算[J]. 大电机技术, 2005, 2: 1-4.

[8] 李伟力, 杨雪峰, 顾德宝等. 多风路空冷汽轮发电机定子内流体流动与传热耦合计算与分析[J]. 电工技术学报, 2009, 24(12): 24-31.

[9] 丁树业, 葛云中, 陈卫杰等. 双馈风力发电机三维温度场耦合计算与分析[J]. 电机与控制学报, 2012, 16(3): 83-89.

[10] 丁树业, 孙兆琼, 徐殿国等. 3 MW双馈风力发电机传热特性数值研究[J]. 中国电机工程学报, 2012, 32(3): 137-143.

[11] 丁树业, 孟繁东, 葛云中. 核主泵屏蔽电机温度场研究[J]. 中国电机工程学报, 2012, 32(36): 149-155.

[12] 丁树业, 孙兆琼, 姜楠等. 大功率双馈风力发电机内部流变特性数值仿真[J]. 电机与控制学报, 2011, 15(4): 28-34.

[13] 魏永田, 孟大伟, 温嘉斌. 电机内热交换[M]. 北京: 机械工业出版社, 1998: 70-80.

分享
Top