Vol.1 No.3 (November 2011)
Study of Nano-ZnO Thin Film Lighting Tube
Objective: The new energy-saving Nano-ZnO thin film lighting tube was innovated in this paper. Method: There are many ways to fabricate Nano-ZnO thin film, but it is difficult to produce the uniform thin film. Nano-ZnO thin film was fabricated by lower cost screen-printed, then, processed thin film with thermal sinter and anneal post-treatment. Result: Through thermal sinter and anneal post-treatment, the field emission was intentionally improved and made the stability and uniformity of emission became better. The fluorescence powder which at least one color was used at the anode electric film of lighting tube. Conclusion: After some measures, under the field emission, the uniformity of anode luminescent was stability. It indicated that the thermal sinter and anneal post-treatment intentionally improve field emission of Nano-ZnO thin film, it can be used in fabricate Nano-ZnO film cathode of field emission lighting tube. The result of the lighting tube research could be used in the fields of LED monitor and lighting equipment and so on, and it also could afford some theory evidence. The innovation is that the power consume of this new energy-saving Nano-ZnO thin film lighting tube was mW grade, it could save plenty of energy source.
张秀霞 , 张丽霞 , 王二垒 , 魏舒怡 (2011) 纳米氧化锌薄膜发光管的研究。 现代物理， 1， 54-58. doi: 10.12677/mp.2011.13009
 J. Rao, B. P. Zhuang, L. M. Lin, et al. Zinc oxide thin films prepared by sol-gel method on quartz substrates. Journal of Fuqing Branch of Fu-jian Normal University, 2009, 96: 68-70.
 Y. Y. Xu, T. Zhang and Z. M. Li. Effect of annealing temperature on sputtered ZnO thin film. Science &Technology Review, 2009, 27(15): 80-82.
 Y. Li, S. Y. Ma and X. S. Li. Technology of preparation of ZnO film. Cansu Sci-ence and Techology, 2009, 25(6): 72-73.
 H. Cai, Y. Chen and S. J. Xie. Preparation and surface modification of nano-sized ZnO. Inor-ganic Chemicals Industry, 2010, 42(6): 24-26.
 X. Z. Luo, Y. T. Zhang. An optimal study of the preparation conditions of nanoparticle ZnO. Materials Review, 2010, 24(5): 87-90.
 X. X. Zhang, S. Y. Wei. The thermal sinter and anneal influence to field emission for printed luhua film. Materials Review, 2009, 23(2): 19-21.
 X. X. Zhang, C. C. Zhu and F. G. Zeng. Electronics emission of screen-printed luhua film. Chinese Journal of Liquid Crystals and Dis-plays, 2008, 23(5): 611-614.
 S. D. Wei. Current situation and development of Nano-ZnO. Chemical Intermediate, 2006, 11: 6-12.
 Y. Zhu, Y. H. Huang and J. He. Quasi one dimensional ZnO nanostructures fabricated without catalyst at lower temperature. Fron-tiers of Physics in China, 2006, 1(1): 72-84.
 L. Liao, J. C. Li, et al. Electron field emission studies on ZnO nanowires. Materials Letters, 2005, 59(19-20): 2465-2467.
 X. X. Zhang, C. C. Zhu. Electron translocation and field emission in printed CNT film by high tempera-ture sintering and post-treatment. Microelectronics Journal, 2009, 40(8): 1166-1169.
 X. X. Zhang, C. C. Zhu. Field-emission lighting tube with CNT film cathode. Microelectronics Journal, 2006, 11(37): 1358-1360.